...

1. First, install all the Frontend Requirements listed above & verify the backend/REST API is publicly accessible.
2. Download the latest dspace-angular release from the DSpace GitHub repository. You can choose to either download the zip or tar.gz file provided by GitHub, or you can use "git" to checkout the appropriate tag (e.g. dspace-7.2) or branch.

3. Install all necessary local dependencies by running the following from within the unzipped "dspace-angular" directory

   Code Block
   # change directory to our repo cd dspace-angular # install the local dependencies yarn install

   
   

4. Create a Production Configuration file at [dspace-angular]/config/config.prod.yml. You may wish to use the config.example.yml as a starting point. This config.prod.yml file can be used to override any of the default configurations listed in the config.example.yml (in that same directory). At a minimum this file MUST include a "rest" section (and may also include a "ui" section),  similar to the following (keep in mind, you only need to include settings that you need to modify).  (NOTE: In 7.1 or 7.0, this file used a different syntax and was located atsrc/environments/environment.prod.ts . An example of that older syntax can also be found below) 

   Code Block
   language yml title Syntax for 7.2 and above (config.prod.yml)
   # The "ui" section defines where you want Node.js to run/respond. It often is a *localhost* (non-public) URL, especially if you are using a Proxy. # In this example, we are setting up our UI to just use localhost, port 4000. # This is a common setup for when you want to use Apache or Nginx to handle HTTPS and proxy requests to Node on port 4000 ui: ssl: false host: localhost port: 4000 nameSpace: / # This example is valid if your Backend is publicly available at https://api.mydspace.edu/server/ # The REST settings MUST correspond to the primary/public URL of the backend. Usually, this means they must be kept in sync # with the value of "dspace.server.url" in the backend's local.cfg rest: ssl: true host: api.mydspace.edu port: 443 nameSpace: /server

   
   

   NOTE: In 7.1 or 7.0, this configuration file uses a different syntax and should be created at [dspace-angular]/src/environments/environment.prod.ts . An example of that older syntax can also be found below:

   Code Block
   title Syntax for 7.1 or 7.0 (environment.prod.ts)
   export const environment = {   // The "ui" section defines where you want Node.js to run/respond. It often is a *localhost* (non-public) URL, especially if you are using a Proxy. // In this example, we are setting up our UI to just use localhost, port 4000. // This is a common setup for when you want to use Apache or Nginx to handle HTTPS and proxy requests to Node on port 4000 ui: { ssl: false, host: 'localhost', port: 4000, // NOTE: Space is capitalized because 'namespace' is a reserved string in TypeScript nameSpace: '/' }, // This example is valid if your Backend is publicly available at https://api.mydspace.edu/server/ // The REST settings MUST correspond to the primary URL of the backend. Usually, this means they must be kept in sync // with the value of "dspace.server.url" in the backend's local.cfg  rest: { ssl: true, host: 'api.mydspace.edu', port: 443, // NOTE: Space is capitalized because 'namespace' is a reserved string in TypeScript nameSpace: '/server' } };

   
   

   1. New in 7.1 or above: Immediately test your connection to the REST API by running yarn config:check:rest .  This script will attempt a basic Node.js connection with the REST API configured in your "config.prod.yml" (or "environment.prod.ts" for 7.1 or 7.0) file and validate the response.
      1. A successful connection should return a 200 Response and all JSON validation checks should return "true"
      2. If you receive a connection error or different response code, you MUST fix your REST API before the UI will be able to work.  See also the "Common Installation Issues" below.  If you receive an SSL error, see "Using a Self-Signed SSL Certificate causes the Frontend to not be able to access the Backend"
   2. HINT #1: In the "ui" section above, you may wish to start with "ssl: false" and "port: 4000" just to be certain that everything else is working properly.  With those settings, you can quickly test your UI by running "yarn start" and trying to access it via http://[mydspace.edu]:4000/ from your web browser.  KEEP IN MIND, we highly recommend always using HTTPS for Production.
   3. HINT #2: If Node throws an error saying "listen EADDRNOTAVAIL: address not available", try setting the "host" to "0.0.0.0" or "localhost".  Usually that error is a sign that the "host" is not recognized.
   4. If there are other settings you know you need to modify in the sample config.example.yml configuration file you can also copy them into this same file.

5. Build the User Interface for Production. This uses your config.prod.yml and the source code to create a compiled version of the UI in the [dspace-angular]/dist folder

   Code Block
   yarn run build:prod

   
   

   1. As of 7.2 or above, you only need to rebuild the UI application if you change source code (under ./src/).  Simply changing the configurations in config.prod.yml do not require a rebuild, but only require restarting the UI.
   2. In 7.1 or 7.0: anytime you change/update your environment.prod.ts, then you will need to rebuild the UI application (i.e. rerun this"yarn run build:prod" command).

6. Assuming you are using PM2, create a JSON configuration file describing how to run our UI application.  This need NOT be in the same directory as the dspace-angular codebase itself (in fact you may want to put the parent directory or another location). Keep in mind the "cwd" setting (on line 5) must be the full path to your [dspace-angular] folder.

   Code Block
   title dspace-angular.json
   { "apps": [ { "name": "dspace-angular", "cwd": "/home/dspace/dspace-angular", "script": "yarn", "args": "run serve:ssr", "interpreter": "none" } ] }

   
   

   1. Not using PM2?  That's OK.  The key command that your process manager should run is yarn run serve:ssr. This is the command that starts the app (after it was built using yarn run build:prod)

7. Now, start the application using PM2 using the configuration file you created in the previous step

   Code Block
   # In this example, we are assuming the config is named "dspace-angular.json" pm2 start dspace-angular.json # To see the logs, you'd run # pm2 logs # To stop it, you'd run # pm2 stop dspace-angular.json

   
   

   1. For more PM2 commands see https://pm2.keymetrics.io/docs/usage/quick-start/
   2. HINT: You may also want to install/configure pm2-logrotate to ensure that PM2's log folder doesn't fill up over time.
   3. Did PM2 not work or throw an immediate error? It's likely that something in your UI installation or configuration is incorrect.  Check the PM2 logs ("pm2 logs") first for errors. If the problem is not obvious, try to see if you can run the UI using "yarn start" (this builds & starts the app in one step).  Once you successfully get the UI running via "yarn start", you should be able to go back to using PM2 successfully.
8. At this point, the User Interface should be available at the URL you configured in your config.prod.yml
   
   1. For an example of what the default frontend looks like, visit the Demo Frontend: https://demo7.dspace.org/ 
   2. If the UI fails to start or throws errors, it's likely a configuration issue.  See Commons Installation Issues below for common error messages you may see and how to resolve them.
   3. If you have an especially difficult issue to debug, you may wish to stop PM2. Instead, try running the UI via yarn start (which is a simple build & deploy process for the UI).  This command might provide a more specific error message to you, if PM2 is not giving enough information back.
9. For HTTPS (port 443) support, you have two options
   1. (Recommended) You can install either Apache HTTPD or Nginx , configuring SSL at that level, and proxy requests to PM2 (on port 4000).  This is our current recommended approach. Plus, as a bonus, if you want to host the UI and Backend on the same server, you can use just one Apache HTTPD (or Nginx) to proxy to both. These instructions are specific to Apache.
      1. Install Apache HTTPD, e.g. sudo apt install apache2
      2. Install the mod_proxy and mod_proxy_http modules, e.g. sudo en2mod proxy; sudo a2enmod proxy_http
      3. Restart Apache to enable

      4. Now, setup a new VirtualHost for your site (preferably using HTTPS / port 443) which proxies all requests to PM2 running on port 4000.

         Code Block

         <VirtualHost _default_:443>   .. setup your host how you want, including log settings...    SSLEngine on    SSLCertificateFile [full-path-to-PEM-cert] SSLCertificateKeyFile [full-path-to-cert-KEY] # Proxy all HTTPS requests from Apache to PM2 on port 4000 # NOTE that this proxy URL must match the "ui" settings in your config.prod.yml ProxyPass / http://localhost:4000/ ProxyPassReverse / http://localhost:4000/ </VirtualHost>

         
         

   2. (Alternatively) You can use the basic HTTPS support built into dspace-angular node server.  (This may currently be better for non-Production environments as it has not been well tested) 
      1. Create a [dspace-angular]/config/ssl/ folder and add a key.pem and cert.pem to that folder (they must have those exact names)
      2. Enable "ui.ssl" (set to true)
      3. Update your "ui.port" to be 443
         1. In order to run Node/PM2 on port 443, you also will likely need to provide node with special permissions, like in this example.
      4. Rebuild and then restart the app in PM2
      5. Keep in mind, while this setup is simple, you may not have the same level of detailed, Production logs as you would with Apache HTTPD or Nginx
10. Additional UI configurations are described in User Interface Configuration.  A guide to customizing the look and feel or branding via a Theme is also available in User Interface Customization

...